OMS Reg Single Setup - Airstream Evoque DIN w/ Miflex Long Hose Set
The Airstream Evoque regulator combines the Airstream first stage with the Evoque second stage to make one of the highest performing regulators on the market today.
The Airstream first stage:
Featuring an overbalanced and environmentally sealed design
Made through a forging process
4 low-pressure ports are angled 30° down and 23° out to allow hose routing directly over the shoulders
2 high-pressure ports are angled down 45° to keep gauges closer to the divers’ hip and body
Exceptionally low Work of Breathing (WOB) effort at 0.80 Joules per litre in all conditions
Forged heat transfer keeping warmer air inside and forcing cold out, allowing this regulator to perform in the coldest conditions where others fail
The Evoque second stage:
Lightweight and balanced design
The balanced diaphragm is securely held down by a ring and inner cover that screws down below the front cover and purge button.
The adjustment knob has a clutch system when turning clockwise to avoid over torquing
Ergonomic pre-dive and dive venturi switch
The inner valve is made of stainless steel
The exhaust has a small hinged door allowing easy access to the diaphragm to clear any debris
This exhaust used with OMS Tattoo Mask or similar will allow all the exhaust gas and bubble to pass its side and not in front of the mask
FEATURES:
European standard: EN250A
CE certified: CE1463
Hose colour: black, carbon, white, pink, red, yellow, orange, green, blue, purple
INCLUDED ITEMS
OMS Airstream first stage DIN
OMS Evoque second stage
OMS Evoque octopus
OMS SPG 63 mm, mineral glass, nickel finishing, "OMS" 0-360 bar
Miflex high-flexible LP regulator hose, 210cm
Miflex high-flexible LP regulator hose, 56cm
Miflex high-flexible inflator hose, 90cm (drysuit)
Miflex high-flexible inflator hose, 65cm
Miflex Carbon HD, HP hose, 60cm
BigGrip™ Stainless Steel Bolt-Snap for long hose
BigGrip™ Stainless Steel Bolt-Snap for SPG
The Airstream Evoque regulator combines the Airstream first stage with the Evoque second stage to make one of the highest performing regulators on the market today.
The Airstream first stage:
Featuring an overbalanced and environmentally sealed design
Made through a forging process
4 low-pressure ports are angled 30° down and 23° out to allow hose routing directly over the shoulders
2 high-pressure ports are angled down 45° to keep gauges closer to the divers’ hip and body
Exceptionally low Work of Breathing (WOB) effort at 0.80 Joules per litre in all conditions
Forged heat transfer keeping warmer air inside and forcing cold out, allowing this regulator to perform in the coldest conditions where others fail
The Evoque second stage:
Lightweight and balanced design
The balanced diaphragm is securely held down by a ring and inner cover that screws down below the front cover and purge button.
The adjustment knob has a clutch system when turning clockwise to avoid over torquing
Ergonomic pre-dive and dive venturi switch
The inner valve is made of stainless steel
The exhaust has a small hinged door allowing easy access to the diaphragm to clear any debris
This exhaust used with OMS Tattoo Mask or similar will allow all the exhaust gas and bubble to pass its side and not in front of the mask
FEATURES:
European standard: EN250A
CE certified: CE1463
Hose colour: black, carbon, white, pink, red, yellow, orange, green, blue, purple
INCLUDED ITEMS
OMS Airstream first stage DIN
OMS Evoque second stage
OMS Evoque octopus
OMS SPG 63 mm, mineral glass, nickel finishing, "OMS" 0-360 bar
Miflex high-flexible LP regulator hose, 210cm
Miflex high-flexible LP regulator hose, 56cm
Miflex high-flexible inflator hose, 90cm (drysuit)
Miflex high-flexible inflator hose, 65cm
Miflex Carbon HD, HP hose, 60cm
BigGrip™ Stainless Steel Bolt-Snap for long hose
BigGrip™ Stainless Steel Bolt-Snap for SPG
The Airstream Evoque regulator combines the Airstream first stage with the Evoque second stage to make one of the highest performing regulators on the market today.
The Airstream first stage:
Featuring an overbalanced and environmentally sealed design
Made through a forging process
4 low-pressure ports are angled 30° down and 23° out to allow hose routing directly over the shoulders
2 high-pressure ports are angled down 45° to keep gauges closer to the divers’ hip and body
Exceptionally low Work of Breathing (WOB) effort at 0.80 Joules per litre in all conditions
Forged heat transfer keeping warmer air inside and forcing cold out, allowing this regulator to perform in the coldest conditions where others fail
The Evoque second stage:
Lightweight and balanced design
The balanced diaphragm is securely held down by a ring and inner cover that screws down below the front cover and purge button.
The adjustment knob has a clutch system when turning clockwise to avoid over torquing
Ergonomic pre-dive and dive venturi switch
The inner valve is made of stainless steel
The exhaust has a small hinged door allowing easy access to the diaphragm to clear any debris
This exhaust used with OMS Tattoo Mask or similar will allow all the exhaust gas and bubble to pass its side and not in front of the mask
FEATURES:
European standard: EN250A
CE certified: CE1463
Hose colour: black, carbon, white, pink, red, yellow, orange, green, blue, purple
INCLUDED ITEMS
OMS Airstream first stage DIN
OMS Evoque second stage
OMS Evoque octopus
OMS SPG 63 mm, mineral glass, nickel finishing, "OMS" 0-360 bar
Miflex high-flexible LP regulator hose, 210cm
Miflex high-flexible LP regulator hose, 56cm
Miflex high-flexible inflator hose, 90cm (drysuit)
Miflex high-flexible inflator hose, 65cm
Miflex Carbon HD, HP hose, 60cm
BigGrip™ Stainless Steel Bolt-Snap for long hose
BigGrip™ Stainless Steel Bolt-Snap for SPG
